Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® C33 01 - PA666 - BASF

Material Data Center offers the following functions for Ultramid® C33 01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid C datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성 - 물질의 비성질
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2200 MPa ISO 527
항복강도 80 MPa ISO 527
항복변형률 5 % ISO 527
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 196 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 57 °C ISO 75-1/-2
기타 특성값단위시험규격
물에서의 흡수성 10.5 % ISO 62와 유사
조건에서의 흡습성 3.2 % ISO 62와 유사
밀도 1120 kg/m³ ISO 1183
Moisture Content 0.08 % -
Bulk density 700 kg/m³ -
물질의 비성질값단위시험규격
ISO 데이터
점도수 195 cm³/g ISO 307, 1157, 1628
특징
생산 공정
Blown Film Extrusion, 기타 압출
인도 유형
펠렛 (입자,알갱이)
특성
Copolymer
Certifications
Food contact, Food approval FDA 21 CFR
응용
Monofilament
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.